Sign In | Register


RECENT ARRIVALS


Next >

Dud Dudley's] Mettallum Martis : Or, Iron Made With Pit-coale, Sea-coale, & C., And with the Same Fuell to Melt and Fine Imperfect Mettals, and Refine Perfect Mettals.

By Dudley, Dud

U.S.: Newcomen Society, 1948. Bound in stiff tan boards, stamped in black. A 54 pp. facsimile of the original book (twice remeoved) originally published in 1665. Tight clean copy. Previous owner's bookplate - General Baker -- founder of the Valley Forge Military Academy. . Facsimile Edition. Hard Cover. Very Good +/No Jacket. 16mo - over 5¾" - 6¾" tall.

$25.00

Nickel -- An Historical Review

By HOWARD-WHITE, F. B.

Princeton: Van Nostrand, 1963. Bound in brown buckram, stamped in gold in illustrated dust jacket. A tight, clean copy of the first edition of this book of the element, Nickel. 350 pp. Photo illustrated. . First Edition. Hard Cover. Very Good ++/Very Good +.

$21.00

Bethlehem Alloy Steels - Bars, Billets, Blooms and Slabs

By Bethlehem Steel

Bethlehem: Bethlehem Steel, 1951. Bound in green leatherette, stamped in silver. This is Handbook #301. 209 pp. Filled with all the information that a prospect would need to do business with the steel company. . First Edition. Hard Cover. Near FIne/No Jacket. 8vo - over 7¾" - 9¾" tall.

$27.50

Arc Plasma Technology in Materials Science.

By GERDEMAN, D.A.

NY: Springer-Verlag, 1972. Bound in rust-colored cloth, stamped in black. A 206 pp. book on flame spraying and materials evaluation. Tight, clean copy. . First American Edition. Hard Cover. Near FIne/No Jacket. 8vo - over 7¾" - 9¾" tall.

$19.00

Electorns, Atoms, Metals and Alloys

By HUME-ROTHERY, William

NY: Philosophical Library, 1955. Rebound in red buckram, stamped in gold. This is an ex-Bethlehem Steel Library book. Three digit pen number to spine and a pocket to the rear panel. No other marks. 387 pp. One page repaired with archival tape. . Reprint. Hard Cover. Very Good/No Jacket. 8vo - over 7¾" - 9¾" tall.

$20.00

Research in Chemical and Extraction Metallurgy

By WOODCOCK, J.T. , et al

Melbourne: Australasian Ins. Of Mining and Mettalurgy, 1967. Bound in blue cloth, stamped in gold. With matching gray and blue dust jacket. The first edition of this 215 pp. monograph. One corner bumped, but overall a tight, clean copy. . First Edition. Hard Cover. Very Good ++/Very Good ++. 4to - over 9¾" - 12" tall.

$55.00

The Use Of Oxygen In The Electrometallurgy Of Steel

By BORODULIN, G. M

London: Pergamon Press, 1961. Bound in green cloth with copper lettering to spine showing prior library numbers across part of spine. Rear end-papers retain Bethlehem library pocket and cards glued in. 112 pgs.. First Edition. Hard Cover. Near Fine/No Jacket.

$18.00

Swedish Steel Manual

By (no author)

Stockholm: Jernkontoret, 1962. Bound in green boards, stamped in white. Spiral bound. Tight, clean copy of this 100 pp. book on the Steel industry in the 1960's. Handsome production. Text in English. . First Edition. Hard Cover. Very Good +/No Jacket.

$22.50

Advances in Fluorine Chemistry - Vols. 1 & 2

By STACEY, M., Et al

London: Butterworths, 1960. Bound in green cloth with red labels stamped in gold. Ex-Bethlehem Steel Corp. copy. with typical flaws (stamp on ffep., Pockets removed from rear panel, Small number on spine of volume 2. . First Edition. Hard Cover. Very Good/No Jacket. 8vo - over 7¾" - 9¾" tall.

$67.50

The Application of Plasmas to Chemical Processing

By BADDOUR, Raymond; TIMMINS, Robert

Cambridge: Mit Pr, 1967. Bound in black cloth, stamped in silver. This is a copy from the Bethlehem Steel Co. Library. Only checked out by one person, so in great condition. Envelope in rear, stamp on ffep. and number on spine. 206 pp. . First Edition. Hard Cover. Very Good +/No Jacket. 8vo - over 7¾" - 9¾" tall.

$75.00

Thermal Plasma Applications in Materials and Metallurgical Processing: Proceedings of an International Symposium Sponsored by TMS Process Fundamentals Committee Held in San Diego, California, USA, March 1-5, 1992 at the 121st TMS Annual Meeting

By El-Kaddah, N.;Tms Process Fundamentals Committee;Minerals, Metals and Materials Society

Warrendale, PA: Minerals, Metals & Materials Society, 1992. Bound in stiff black glossy, illustrated boards. The first edition of this 367 pp. book Tight, clean copy. Scarce -- especially in this protected condition. . First Edition. Hard Cover. Near Fine/No Jacket. 8vo - over 7¾" - 9¾" tall.

$135.00

Metallurgy of Lead

By HOFMAN, H. O

NY: McGraw-Hill, 1918. Bound in red cloth, stamped in gold. Previous owner's neat name at top edge of ffep. Tight, clean copy. 664 pp. with charts, illustrations and diagrams. Scarce in this protected condition. . First Edition. Hard Cover. Very Good +/No Jacket. 8vo - over 7¾" - 9¾" tall.

$125.00

Metallurgy of the U.S.S.R. 1917-1957

By BARDIN, Ivan Pavlovich

Jerusalem: Israel Program for Scientific Translations, for the National Science Foundation, Washington, D.C. and the Department of Interior, U.S.A.,, 1961. Bound in black and red (Soviet-looking) wraps with a cloth spine. This is the complete book consisting of Volume 1, Parts I and II - a whopping 997 pp. Laid in are two "blurb sheets". This is an ex Bethlehem Steel Company copy with a seven digit number at base of spine, but no marks on the pages. Just an envelope and table of whom had checked the book out (no one!) at the rear of book. Overall, a tight, clean copy. . First American Edition. Soft Cover. Near Fine/No Jacket - As Published. 4to - over 9¾" - 12" tall.

$295.00

Heat Exchanges in Shaft Furnaces

By KITAEV, B.I, et al

London: Pergamon Press, 1967. Bound in light blue cloth, stamped in silver. Ex-Bethlehem Steel copy. Numbers on spine, small blindstamp on title page, pocker on rear pastedown. Translated from the Russian by M.M Page and H. Simons. xviii, 301 pp., Illustrated.. First Edition. Hard Cover. Very Good/No Jacket. 8vo - over 7¾" - 9¾" tall.

$42.50

Proceedings of the Symposium on Chemical Engineering in the Metallurgical Industries. Edinburgh, 25-26 September, 1963.

By The Institution of Chemical Engineers

London: The Institution of Chemical Engineers, 1963. Ex-Bethlehem Steel Library but only checked out twice. Bound in green cloth, stamped in gold. 147 pp. A number on spine and a pocket from Beth. Steel Library on back pastedown. . First Edition. Hard Cover. Very Good +/No Jacket. 4to - over 9¾" - 12" tall.

$65.00

Iron Ore Reduction

By ROGERS, R.R

NY: Macmillan, 1962. Bound in green cloth stamped in black and gold. Ex-Bethlehem Steel library with numbers on the spine and a pocket on the rear pastedown, but no other marks. 359 pp. From the Electrochemical Society. Electrothermics and Metallurgy Division. Symposium. Chicago, 1960. . First Edition. Hard Cover. Very Good/No Jacket. 8vo - over 7¾" - 9¾" tall.

$220.00

Research Techniques for High Pressure and High Temperature

By ULMER, Gene C

NY: Springer-Verlag, 1971. Bound in brown cloth, stamped in yellow with matching dust jacket. A tight, clean barely used copy of this 367 pp. book. . First Edition. Hard Cover. Near Fine/Near Fine. 8vo - over 7¾" - 9¾" tall.

$72.50

Arc Welded Projects for the School Shop and Farm (2 Volumes)

By (no author)

Cleveland, OH: The James F. Lincoln Arc Welding Foundation Two volumes of shop manuals from 1975 and 1979; outsize paperback; illustrated in black & white; 77 and 274pp.. Reprint. Soft Cover. VG++/No Jacket. 4to - over 9¾" - 12" tall.

$55.00

American Silverplate

By RAINWATER, Dorothy T. And H. Ivan

Thomas Nelson Inc./Everybodys Press, 1968. Color plates; black & white illustrations; end-paper illustrations; 480pp.. First Edition. Hard Cover. Fine/Fine. 4to - over 9¾" - 12" tall.

$55.00

Machining Estimating Manual for Stainless Steels

By MCCLYMONDS, Norman

Fort Wayne, IN: Joslyn Stainless Steels, 1963. Bound in black buckram with orange lettering; black & white photos; graphs and charts; previous owners name on ffep.; 141pp.. First Edition. Hard Cover. Near Fine/No Jacket.

$15.00

Next >